Flange Circular Seam Welding Machine
It can accomplish the automatic circular seam welding of flange.
Surface forming uniform and good appearance. Depth of fusion and
width of fusion meet welding requirement, easy to load and clamp.
Adopts MAG welding type, the welding process will be finished at
2.Feature of Equipment
1) Welding torch will weld the workpiece vertically, after changing
position, the workpiece rotates, the welding position is
2)The machine has high voltage and slow wire feeding performance,
which guarantees reliable arc igniting. Machine also has low
welding voltage and low current for filling crater.
3) It adopts push-type wire feeding mode, to guarantee feeding
4)Welding torch can be adjusted longitudinally, which suits to
various welding type.
5) PLC is used to control the whole machine operating,stepless
adjustment, to improve equipment reliability.
6) The welding mode and welding specification can be preset , saved
and recalled. Via touch man-machine interface, it is convenient to
modify parameters and alternate status.
7) Welding torch can move up and down, side to side, and the angle
can be adjusted, to reach welding requirement.
|1.lift motor power||0.75KW|
|2.rotation axis motor power||0.55KW|
|3.Welding Torch Adjustment|
|4.dip angle||25°~ 60°|
|welding voltage||15-36v. stepless adjustment|
|welding current||50-500A, 60% duty cycle|
|welding wire diameter||Φ1.2--Φ1.6mm|
|shielding gas consumption||15L/MIN|
|working voltage||3phases 380V±15%|
|Applicable workpiece welding length:||overlap amount step adjustment, precision is 1/900 perimeter|