Tank / cylinder Longitudinal Seam Automatic Welding Machine
Part 1. Application
Machine can weld stainless steel and steel materials Weld
longitudinal seam on cylindrical part. Welding process will be
continual and steady. TIG welding with wire feeder. Machine can
work continuously for 24-hour.
Part 2. Technique Parameters
|Welding speed||700mm/min (according to welding thickness)|
|Torch moving range in left-right direction||100mm|
|Torch lifting range||100mm|
|Argon shielding gas consumption||10L/min|
|Welding power source||Japan Panasonic|
|Machine working voltage||380v 3phase 50z|
Part 3. Machine Structure
1. TIG water cooled welding torch is pneumatically moved in up-down
direction. Welding torch can be adjusted up and down, side to side
and angled turn. The body of welding torch is ceramic. Welding head
is driven up and down by cylinder.
2. Japan Omron CP-1H 40CDT PLC machine as the control
system,control the implementation of the welding program. Stable
system, simple structure, and easy to maintain. Touch screen as the
input and output interface.Welding length, arc striking &
ending time, welding current and welding speed can be input through
the interface. Welding mode and welding specification can be
preset,saved and recalled. With the help of touch man-machine
interface,it is convenient to change parameters and status.
3. We are using 6mm Copper clamping bar and 20mm copper back bar in
machine.They can be for steel, stainless steel and Al. Copper bar
is used to conduct both heat and electricity. Firmly clamp
work-piece. It is also used to protect steel surface. Surface of
the cylinder/tank will not have scratch and mechanical damage.
4.Japan Panasonic TIG welding power source. 1set power source and
1set water chiller will go with machine.