Automatic Welding Machine of High-pressure Oil Pipe
Technical Requirement
It is mainly used to automatically weld angle shape circular seam
of various hard tube. Make sure the welding specification is
uniform, good appearance. It is easy to operate, reliable. Reach to
the welding requirement.
Main Feature
1. Workpiece is fixed, welding torch rotates, angle shape welding
position.
2.Workpiece is positioned by central flange, clamped pneumatically.
3.Welding torch can be adjusted up and down, side to side , to meet
various welding requirement.
4.OMRON CPM-30CDR PL,workpiece rotation speed is adjusted by
Panasonic 0.375KW AC frequency inverter, stepless adjustment, to
improve reliability.
5.Applicable to automatically weld pipe and angle shape flange,
high welding seam quality, good and even form .100% superposition
of welding seam, high automatic level.
6.Adopt Panasonic YM-350GL pulse digital welding power source,
guarantee reliability of equipment.
7.It can accomplish the motion of automatic clamp, automatically
approaching and keeping away from workepiece . Convenient and quick
positioning, high precision.
8. Without any tangling of water pipes, electric wires, air tubes
and cables. Guarantee the good condition of pipe line in the
continuous work situation and reduce the failure rate.
9.In the welding process, welding specification and parameter can
be changed and controlled at any time, to meet some special
requirements.
Main Parameter
| 1. rotation speed | 1-8r.p.m stepless adjustment |
| 2.motor power | 1.5KW |
| 3.Welding Torch Adjustment | |
| lift distance | 100mm |
| left-right distance | 100mm |
| 4.dip angle | 25°~ 60° |
| 5.welding current | 50-500A, 60% duty cycle |
| 6.welding voltage | 15-36v. stepless adjustment |
| 7.welding wire diameter | Φ0.8--Φ1.6mm |
| 8.working voltage | 3phases 380V±15% |
